Cold rolled coil s355mc:
Cold rolled coil Manufacture:
Yogic offers the Cold Rolled steel in a variety of sizes, grades and surface finishes to meet specific end-use requirements. Cold Rolled Sheet is manufactured from hot rolled coils by pickling to remove the surface oxide produced during the hot rolling stage, and cold reducing through a Cold Mill to the desired thickness
THICKNESS: 0.15-5.0MM.
WIDTH: 914, 925, 1000, 1219, 1220, 1250, 1500.
Reference standard: JIS G3141 or EN 10130
Cold rolled coil Packaging Details:
· PE waterproof paper.
· 2 inside edge protection rings.
· 2 outside edge protection rings.
· 2 side protection disks.
· Inside protection cover (galvanized sheet).
· Outside protection cover(galvanized sheet).
· 3 circumferential straps.
· 4 radial staps.
Cold rolled coil Scope of Application:
Usage: COMMERCIAL STEEL, STRUCTURAL STEEL, ENAMELING, HIGH TENSILE STRENGTH STEEL, Automotive Parts, Electrical Motors, Lighting Ballasts, Major Appliances, Racking/Shelving, Water Heaters, Pools (Above Ground/Inground), Commercial Doors, Garage Doors, Drums And Pails, Strapping - Seals, Tubular Goods.
World wide customer satisfaction:
More than 50 worldwide customers none-risky experiences approved.
Yogic has been exporting steel coils to more than 50 countries directly. Our long term supply extends to USA, UK, Germany, Italy, Spain, Belgium, France, Poland, Greece, Ukraine, Belarus, Russia, Turkey, Egypt, Saudi Arabia, Iran, Ethiopia, Niger, Brazil, Colombia, Chile, Peru, Australia, New Zealand, etc...
Contacts:
Shannon
Yogic International Steel Co., Ltd.
Zhejiang Yogic steel Material Co., Ltd.
Export DEP: 5th Floor, No. 1 Jinggang, No. 1508, Youyi Road, Shanghai
If you have any interesting in our cold rolled coil, do not be hesitate to contact us.
| Item |
Thickness(mm) |
|
Width(mm) |
|
ID(mm) |
|
| Range |
0.15-3.0 |
|
800-1320 |
|
508-610 |
|
| Standard |
Q/BQB403-2009 |
JIS G3141-2005 |
EN 10130-2006 |
ISO 3574-1999 |
JFS A2001-1998 |
EN10130-1999 |
| Steel Grade |
DC01 |
SPCC |
DC01 |
CR1 |
JSC270C |
ST12 |
| DC03 |
SPCD |
DC03 |
CR2 |
JSC270D |
RRst13(ST13) |
| DC04 |
SPCE |
DC04 |
CR3 |
JSC270E |
ST14 |
| DC05 |
SPCF(SPCEN) |
DC05 |
CR4 |
JSC270F |
ST15 |
| DC06 |
SPCG |
DC06 |
CR5 |
JSC260G |
ST16 |
| DC07 |
- |
DC07 |
- |
- |
|
| Grade and appliances: |
| Steel Grade |
Application |
| DC01(St12) |
Normal |
| DC03(St13) |
Drawing |
| DC04(St14) |
Deep drawing |
| DC05(St15) |
Special deep drawing |
| DC06(St16) |
Extra deep drawing |
| DC07(St17) |
Super extra deep drawing |
Audited Supplier 
){kind=link}